logo
Best and fastes game servers all over the europe
Navigacija: Naslovnica >> Podpora >> Vodiči in Programi >> Ventrilo vodič
Vodič za upravljanje Ventrilo strežnikov s pomočjo Admin oziroma Rcon gesla. V spodnjih korakih vam bom opisal kako upravljati vaš Ventrilo strežnik z admin pravicami, tako da boste lahko kreirali in brisali kanale in jih tudi zaklepali ali odklepali. Brcnili oziroma banali igralce iz strežnika kot tudi eno izmed najpogostejših vprašanj, kako vaš ventrilo server ZAKLENITI z geslom

Za ta najbolj začetnike, ki se na strežnik še ne znate povezati, pa si lahko preberete Eliteplaying.com Ventrilo vodič.

Prvo kar je potrebno postoriti, je se prijaviti z rcon oziroma admin geslom na server. To storimo tako, da z desno kliknemo na "lobby" oziroma na ime serverja, izberemo "Server admin" in kliknemo "Login".

 

 

Odpre se nam okence in notri vpišemo Server Admin geslo in kliknemo  "Ok".

 

Sedaj smo na strežnik prjavljeni kot Administrator in lahko počenjamo določene stvari, kot je ustvarjanje in brisanje kanalov, njihovo zaklepanje, kickanje ljudi itd.

 

KREIRANJE KANALOV:

Z desno kliknemo na "lobby" ozirma ime serverja, označimo  "Channel admin" in kliknemo gumb "Create"

Ko kliknemo na "Create" se nam odpre okno s štirimi vrsticami. V prvo vrstico "Display name" vpišemo ime kanala, ki želimo da se prikaže na serverju. Drugo okno lahko pustimo prazno, v tretje okno "Channel password" vpišemo geslo za se pridružiti na kanal, torej če ga želimo zakleniti to vrstico izpolnemo sicer pa jo lahko tudi pustimo prazno, če želite kanal brez gesla. Zadnja vrstica "Admin password" pa je polje v katero vpišemo geslo s katerim bodo lahko ostali člani (tisti, ki niso Server Administratorji) lahko kreirali in odstranjevali podkanale v tej sobi. 

 

KICK IN BAN IZ STREŽNIK:

Prvo da razjasnimo razliko med pojmoma kick in ban.

Kick = po slovensko brca, če brcnemo uporabnika iz strežnika ga samo odvežemo oziroma "disconnectamo" iz strežnika in se bo lahko kadarkoli ponovno nazaj povezal in vrnil na vaš strežnik.

Ban = ali po slovensko prepoved, ko uporabnika banamo iz strežnika se ta, dokler ga Server Administrator lastno ročno ne odstrani iz prepovedane oziroma ban liste, ne bo moral nazaj povezati na vaš strežnik.

Kako unbanati oizroma kako odstraniti uporabnika iz prepovedane liste bom razložil v malenkost bolj spodaj v vodiču.

 

Kickati in Banati je zelo enostavno, vse kar moramo storiti je, da z desno kliknemo na ime enega uporabnika, nato izberemo polje "Server Admin" in se odločimo ali bomo kliknili "Kick..." ali pa "Ban...". Nato vse kar moramo še storiti je vpisati "Reason" ali razlog zakaj uporabnika kickamo (njemu se bo ta razlog oziroma sporočilo prikazalo na ekranu) in stisniti "OK".

 

ODRTJE ADMIN KONZOLE IN RCON UPRAVLJANJE:

Preko /rcon ukazov oziroma upravljanje preko konzole storimo sledeče. Prede pa karkoli storimo z rconom, moramo na server biti prijavljeni z Server Admin geslom, kako to storimo sem opisal v prvem koraku vodiča. Konzola je ubistvu "Chat" okno, odpremo jo tako, da na serverju v menuju kliknemo na gumb "Chat...".

 Sedaj se nam odpre Chat okno. V to okno spodaj v vpisovalno vrstico za testiranje ali konzola deluje vpišemo komando "/rcon status". Če se nam karkoli izpiše oziroma se nam izpišejo povezani igralci in njihovi IP-ji pomeni, da zadeva deluje in lahko veselo nadaljujemo z ostalim delom. 

 

UNBAN OZIROMA ODSTRANJEVANJE IGRALCEV IZ PREPOVEDANE LISTE:

Sedaj pa k bistvu tega dela vodiča in sicer kako odstraniti bananega igralca. V konzolo najprej vpišemo komando "/rcon banlist" ki nam izpiše IPje in imena vseh prepovedanih uporabnikov. Željenga uporabnika odstranimo tako, da najprej pogledamo njegov IP (njegov IP je tista prva dolga številka z " . " vmes) in nato vpišemo komando recimo kot primer "/rcon bandel 82.192.57.248". Če nam je izpisalo "Success." pomeni, da je uspešno odstranilo bananega igralca. O tem se lahko še dodatno prepričamo tako, da še enkrat vpišemo komando "/rcon banlist" in če želenega igralca ni več na spisku pomeni, da smo ga uspešno odstranili.

 

 

ZAKLEPANJE STREŽNIKA Z GESLOM:

Za zaklepanje strežnika moramo odpreti konzolo. V konzolo sedaj vpišemo naslednji komandi "/rcon auth 1" in nato še komando, s katero določimo željeno geslo za se poevzati na server, ki je "/rcon password naseGeslo" beseda naseGeslo pa predstavlja geslo, ki ga želite določiti.

 

Sedaj pa bo potrebno vpisati geslo za se povezati na ta server.

 

ŠE VEČ KOMAND ZA RCON UPRAVLJANJE (razlaga v Angleščini):

auth < 0 | 1 | 2 >
Introduced with version 1.03, allows the authorization mode to be changed dynamically. 0 - No Authentication, 1 - Global Password, 2 - Registered Users.

banadd
Adds an IP address, or subnet address, and a reason for the banning to the ban list and ban file. If you specify a subnet like 192.168.0.0/16 then any IP address that starts with 192.168 will be , whereas 192.168.67.0/24 would ban anything that starts with 192.168.67.
Subnet banning was added to the server starting with verison 2.1.2.

bandel
Deletes an IP address from the ban list. Starting with version 1.03 this command will automatically update the ban file. Similar to banadd if you want to remove a ban address that is specified by a subnet then you must also specify the same ip and subnet in the bandel command.
Subnet banning was added to the server starting with version 2.1.2.

banlist
This option will display all of the IP address, the user name of the IP address, the admin who them and a reason why.

clientkick
Instructs the server to disconnect a user where is the users connection ID number.

clientstatus
Introduced with version 1.03, this option will output more detailed information about a specified client.

comment
This option allows the server's comment string to be changed dynamically. The can be anything you want.

diag < 0 | 1 >
Introduced with version 1.03, allows the diagnostic mode to be changed dynamically.

filtertts < 0 | 1 >
Introduced with version 1.07, enables or disables filtering out of TTS binds.

filterwave < 0 | 1 >
Introduced with version 1.07, enables or disables filtering out of wave file binds.

help
Displays the list of possible console commands.

kickall
Introduced with version 1.03, kicks all clients connected to the server. If issued via an "/rcon" command from an admining client, that client is exempted from the kick.

loggrep
Introduced with version 1.07, allows the servers log file to be searched for a specific piece of text. If lines is 0 then all matching entries will be displayed, otherwise only the last number of specified matching the search will be displayed. The search string does NOT support regular expressions and all comparisons are case sensitive.
WARNING : Using this command may cause the server to momentarily interrupt voice communication for all clients depending on the size of the log file. It's also possible that the results will be too long and potentially flood the requesters connection with too much information, thus causing the server to disconnect you. It is probably best that you always specify a number of to limit the results.

maxclients
This option will display the current max client limit for the server.

monitor < 0 | 1 >
This option is only valid when requested from a remote client using the "/rcon" option in the chat window. It instructs the server to send all status and log messages to the client that typed this command. The monitor command is turned on by setting the value to 1, and turned off by a value of 0. Prior to version 1.03 the monitor command was a toggle.

name
Introduced with version 2.0.0, this option will display the server's name and current comment. Usefull for when you start multiple servers on the Linux platform using the "screen" program.

password
Introduced with version 1.03, allows the global login password to be changed dynamically. See the 'auth' cvar to enable the password check.

pingrate <1..10>
Introduced with version 1.07, allows for changing the interval (specified in seconds) that the server will ping the clients.

pingtrace < -2 | -1 | 0 | 1..n >
Introduced with version 1.07, allows for tracing the ping results as they are reported back from the clients. This option is only valid when issued by remote clients and does not work from the server's console window.
-2 = Display the ping results for those clients that are in the same channel.
-1 = Display the ping results for all clients.
0 = Ping tracing disabled.
1..n = Display the ping results for a specific client (specifies the UID)

quit
Forces the server to shutdown. If the server was started by an NT Service control program then it will be automatically restarted in 10 seconds.

serverstatus
Introduced with version 1.03, output detailed status information about the server and specified interfaces.

status
Displays the user id, channel id, login name and IP address for all of the connected users.

timestamp < 0 | 1 >
Introduced with version 1.07, enables or disables displaying timestamp's on console and remote console server messages.

tts
This option will send out a Text-to-speech message to all users connected to the server, no matter which channel they are currently in. The can be anything you want. This command and the comment command could be very useful if you are hosting a server that is reserved for a specific amount of time and you want to send TTS messages informing the connected users about how much time remains before the server is shutdown.

version
Displays the application version of the server.

 

24h podpora
Vodiči in članki
FAQ Vprašanja